Be Careful while Flashing via Odin!
- Do not turnoff / Remove USB Cable while flashing.
- Flash Correct Firmware File; otherwise your device may become HARD BRICK means DEAD! (Unless you have JTAG)
- Read Flashing Instructions Carefully.
What You need?
- A PC or Laptop with Windows Operating System.
- Usb Cable for Galaxy Ace.
- Odin Multi Downloader and Cooper.ops file for Odin. Odin for GT-S5830+OPS.zip
- Samsung Drivers for PC. Download Here
- Stock Firmware for your region. (Go to this post)
Step-by-Step Instuctions:
- Install Samsung Drivers.
- Extract Stock firmware zip file to get the .tar.md5 file named like "S5830XWKTM........"
- Extract "Odin for GT-S5830+OPS.zip" with WinRar, 7Zip or Windows zip file utility.
- Power off your Phone.
- Get into "Download mode" by pressing Home + Vol(-) + Power Keys.
- Open Odin_Multi_Downloader.exe
- Connect your phone to pc via USB cable.
- Make sure that your phone is detected in "Com Port Maping" area (YELLOW Color)
- Step:1 - Press "Select Ops" button and choose Cooper.ops file along with the Odin_Multi_Downloader.exe
- Step:2 - Check "One Package" tick.
- Step:3 - Press "One Package" button and choose the firmware file xxxx.tar.md5
- Step:4 - Press "Start" button under Execution.
- Wait for some time... The flashing may take about 4 min - 5 min. The Phone will be auto rebooted after successfull flasing.
- Remove the USB Cable.
- If you are facing boot loop after flashing completed on Odin, you have to go to Stock Recovery (Home+Power Key combination) and select wipe data/factory reset.
